TP-Link TL-WR702N User Manual page 29

The Router supports three popular ways PPPoE, Dynamic IP and Static IP to connect to the
Internet. To make sure the connection type your ISP provides, please refer to the ISP. Make sure
the cable is securely plugged into the WAN port before detection.
PPPoE - For this connection, you will need your account name and password from your ISP.
If you have applied ADSL to realize Dial-up service, you should choose this type. Under this
condition, you should fill in both the User Name and Password that the ISP supplied, then
click Next and proceed to Figure 3-14. Please note that these fields are case-sensitive.
Dynamic IP - Your ISP uses a DHCP service to assign your Router an IP address for
connecting to the Internet. When the Router connects to a DHCP server, or the ISP supplies
you with DHCP connection, please choose this type. If you choose this type of connection,
the next screen for Mac Clone will appear as shown in Figure 3-12. Do as instructed on this
page. Afterwards, click Next and proceed to Figure 3-14.
TL-WR702N
Figure 3-10 Quick Setup - WAN Connection Type
Figure 3-11 Quick Setup - PPPoE
150Mbps Wireless N Nano Router
- 17 -