GE JCP67YWW Installation Information

GE Appliances
JCP67YWW—40" Free-Standing Electric Range
Installation Information (Dimensions in inches)
44-1/8**
40-1/8
47-1/4
27-3/8*
*Dimension from wall to front of closed
oven door handle.
**Includes required 4" door swing
allowance for side-hinged oven or stor-
age compartment door.
Created 7/97
4
8-1/2
18-1/2
10
7" MAX.
10
For answers to your Monogram,
Performance Series, ™
Hotpoint and RCA appliance questions, call
GE Answer Center ®
All GE ranges are equipped with
an Anti-Tip device. The installation
of this device is an important,
required step in the installation
of the range.
Top View
40-1/8
10
20
Locate outlet
in shaded area
Floor
® GE Profile
GE Profile, ™ GE,
service, 800.626.2000.
Listed by
Underwriters
Laboratories
R
KW Rating
240V 14.2
208V 10.7
Note: All 40" Ranges conform to
U.L. requirements for 0" spacing
from range to adjacent walls below
countertop. To reduce possibility of
scorching of the side wall adjacent
to the heating elements, it is
recommended a minimum 2"
spacing from adjacent side walls
be allowed for possible extended
high-heat, no-load heating element
Wall
operation.
Receptacle Locations: For all
40" Free-Standing Ranges locally
approved flexible service cord or
conduit must be used because
terminals are not accessible after
range installation. See shaded area
in drawing for location of electrical
outlet box. Recommended outlet
locations allow range to be
installed directly against rear wall.
Installation Information: Before
installing, consult installation
instructions packed with product
for current dimensional data.