Example Of Connecting System 2 - Pioneer DEX-P99RS Installation Manual

Connecting the units

Example of connecting system 2

8
High range output
(HIGH RANGE OUTPUT)
Mid range output
(MID RANGE OUTPUT)
Low range output
(LOW RANGE OUTPUT)
Subwoofer output
(SUBWOOFER OUTPUT)
Note:
The auto TA&EQ function is designed to automatically configure multi-way
speaker system.(like a system with tweeter,mid range, woofer and subwoofer)
In case you carry out the auto TA&EQ function with full range speaker system
like this example, please follow the procedure as below;
1. Set up the existence of each speaker in the initial setting menu.
2. Set up manually crossover values in the audio menu according to
subwoofer and full range speakers connected.
3. Start the auto TA&EQ and then select "Custom N/W" in the menu.
4. Complete the auto TA&EQ.
15 cm
15 cm
23 cm
23 cm
IP-BUS input (Blue)
IP-BUS cable
Blue/white (SYSTEM REMOTE CONTROL)
Connect to system control terminal of the power
amp or auto-antenna relay control terminal (max.
300 mA 12 V DC).
Not used
Multi-CD player
(sold separately)