GE JBP45 Owner's Manual page 41

Problem
LATCH DOOR light
is on when you
want to cook
"F—and a number"
flash in the display
Power outage
Possible Causes
The oven door was
accidentally locked.
You have a function
error code.
Power outage or surge.
What To Do
•
Turn the Oven
Temperature knob to OFF .
Allow the oven to cool.
Never force the door
latch handle.
• If a function error code
appears during the self-
cleaning cycle, check the
oven door latch. The latch
may have been moved, even
if only slightly, from the
locked position. Make sure
the latch is moved to the
right as far as it will go. Turn
the Oven Temperature
knob to OFF . Allow the
oven to cool for one hour.
Put the oven back into
operation.
•
Disconnect all power to
the range for 5 minutes
and then reconnect power.
If the function error code
repeats, call for service.
• Some models will
automatically resume their
setting once the power is
restored. On models with a
clock, you must reset the
clock. If the oven was in
use, you must reset it by
turning the Oven
Temperature knob back to
OFF , setting the clock and
resetting any cooking
function.
41