Prepare The Opening; Anti-Tip Bracket - GE JBP45 Owner's Manual

Read these instructions completely and carefully.
1

Prepare the Opening

Allow 1 1 ⁄ spacing from the range to adjacent vertical walls above cooktop surface.
2
Allow 30 minimum clearance between surface units and bottom of unprotected
wood or metal top cabinet, and 15 minimum between countertop and adjacent
cabinet bottom.
EXCEPTION: Installation of a listed microwave oven or cooking appliance over the cooktop shall
conform to the installation instructions packed with that appliance.
If cabinet storage is installed, reduce risk by installing a range hood that projects
horizontally a min. of 5 beyond the bottom of the cabinets. Make sure the wall
covering, countertops and cabinets around the range can withstand heat
generated by the range, oven or cooktop up to 200°F.
30 15
Min. Min.
Wall
1 1 ⁄
Min.
2
Outlet box
Install the
outlet box
on either
Cord
side of
the C
L
Hood
5 Min.
Locate the outlet box within either shaded area.
C of range
L
Wall
7 1 ⁄
2
7
3 1 ⁄
2
Floor

Anti-Tip Bracket

(install in either rear corner)
Not less than the width
of the range
14
5⁄
7 1 ⁄
8
2
5
2 1 ⁄
4
29