Using The Control Panel Buttons - Epson Stylus COLOR 670 Daily Use

For Macintosh users
1. Make sure that the printer is on, and the B black and A color
ink out lights are off.
2. Click the
dialog box, then click the Head Cleaning button.
3. Follow the on-screen instructions.

Using the control panel buttons

Follow the steps below to clean the print head using the control
panel buttons.
1. Make sure that the P power light is on and that both the B
black and A color ink out lights are off.
Note:
If the B black or A color ink out light is flashing or on, you cannot
clean the head.
2. Hold down the
The printer starts cleaning the print head and the P power
light begins flashing. Print head cleaning takes about thirty
seconds to complete.
Utility icon button in the Print or Page Setup
R
cleaning button for three seconds.
49