Details Of Menu Mode - Epson Stylus Pro 3800 User Manual

EPSON Stylus Pro 3800
4. Select an item
Press the Paper Feed/Down d or Ink Cover Open/Up u button to select a desired
item.
5. Set the item
Press the Menu/Right r button to enter the selected item. The first parameter appears
on the LCD panel.
6. Select a parameter
Press the Paper Feed/Down d or Ink Cover Open/Up u button to select a parameter
for the item.
7. Set the parameter
Press the Enter
execution only, press the Enter
After execution, the printer exits Menu mode and returns to the READY status.
8. Exit Menu mode
Press the Cancel/Reset + button. The printer returns to the READY status.

Details of Menu mode

PRINTER SETUP
This menu contains the following items.
PLATEN GAP
You can adjust the distance between the print head and paper. Normally, leave this set to
STANDARD. If you find that printed images are smeared, select WIDE or WIDER. Select NARROW
for printing on thin paper, or WIDEST for printing on thick paper.
PAPER SIZE CHECK
When you select ON, the printer stops printing if the width of paper loaded in the printer
does not match the data width. When you select OFF, the printer continues to print even if
the paper width does not match the data width, and the printer may print beyond the paper.
Note:
❏ When you load the paper using the manual feed slot, select ON.
❏ When you perform borderless printing, select ON.
User's Guide
button to store the selected parameter. If the parameter is for
button to execute the function for the item.
103
The Control Panel