Menu And Map Display; How To Use Menu Screens; Main Menu - Pioneer CNDV-50MT Operation Manual

MAN-CNDV-50MT-EN.book Page 21 Wednesday, May 4, 2005 1:49 PM

Menu and Map Display

This section describes the basic operations,
including how to display the main menu and how
to use the shortcut menu and the map screen.

How to Use Menu Screens

The basic operation of the navigation is
performed by using menus.
There are two types of menu: the "Main menu"
and the "Shortcut menu".
The functions that cannot be used during the
memory navi mode are indicated in light grey.
If you want to use such functions, insert the
map disc.

Main menu

You use this menu for basic operation of your
Navigation System.
1
With the map displayed, press the NAVI
MENU button.
2
To change to the menu you want to use,
touch the name of the menu displayed at
the top of the screen.
The main menu is divided into four:
"Destination", "Traffic/Info", "Route
Options", and "Settings".
3
If you want to return to the map, press the
POS (or NAVI MENU) button.
Destination menu
Select the destination search method. Also the
route set can be cancelled from this menu.
Specifying the address and searching the
destination Page 14
Searching the destination by map
Other search methods
Traffic/Info menu
Used to check traffic information or select the
RDS-TMC station.
All Traffic
Traffic On Route
Route Options menu
Used to specify the conditions for setting the
route to the destination.
Setting the Route Options
"Edit Current Route", "View Current
Route", and "Recalculate" can be used
when the route is set.
Settings menu
Set the navigation functions so they can be used
easily.
Settings menu
Page 27
Chapter 2
Page 29 to 32
Page 46
Page 47
Page 33
Chapter 5
21