Makita BUC250 Instruction Manual page 15

ENGLISH
(Original instructions)
1 Red part
2 Button
3 Battery cartridge
4 Lock-off button
5 Switch trigger
6 Front hand guard
7 Lock
8 Unlock
9 Adjusting screw
10 Carabiner
(rope attachment point)
11 Slightly slide
12 Move in the upright position
13 Press in
14 Loosen
15 Sprocket cover
16 Adjusting dial
17 Sprocket
SPECIFICATIONS
Chain speed per minute
Length of guide bar
Guide bar type
Saw chain
Number of teeth
Overall length
Net weight
Rated voltage
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from
country to country.
• Weight, with battery cartridge, according to EPTA-Pro-
cedure 01/2003
Intended use
The tool is intended for cutting lumbers and logs.
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future reference.
Explanation of general view
18 Adjusting pin
19 Small hole
20 Tighten
21 Lever
22 Low
23 High
24 Guide bar
25 Saw chain
26 Adapter
27 Hook
28 Tool
29 Belt
30 Arm cord hook band
31 Holder
32 Extension cord (Battery
adapter)
33 Adapter (Battery adapter)
34 Oil tank cap
Model
Type
Pitch
No. of drive links
Sprocket nose bar
91VG
3/8"
40
6
576 mm
CORDLESS CHAIN SAW SAFETY WARNINGS:
1. Keep all parts of the body away from the saw
chain when the chain saw is operating. Before
you start the chain saw, make sure the saw chain
is not contacting anything. A moment of inatten-
tion while operating chain saws may cause entan-
ENE031-1
glement of your clothing or body with the saw chain.
2. Always hold the chain saw with your right hand
on the rear handle and your left hand on the
front handle. Holding the chain saw with a reversed
GEA010-1
hand configuration increases the risk of personal
injury and should never be done.
3. Hold the power tool by insulated gripping sur-
faces only, because the saw chain may contact
hidden wiring. Saw chains contacting a "live" wire
may make exposed metal parts of the power tool
"live" and could give the operator an electric shock.
4. Wear safety glasses and hearing protection. Fur-
ther protective equipment for head, hands, legs
and feet is recommended. Adequate protective
clothing will reduce personal injury by flying debris
or accidental contact with the saw chain.
35 Oil tank opening
36 Oil inspection window
(for refilling the tank with oil)
37 Oil inspection window
38 Lower guide
39 Felling area
40 Felling direction
41 Danger zone
42 Escape route
43 Scabbard (chain cover)
44 File forward stroke
45 1/5 of the file diameter
46 Small dust or particles
47 Slotted bit screwdriver
48 Locking ring
49 Limit mark
50 Brush holder cap
51 Screwdriver
BUC250
8.3 m/s (500 m/min)
250 mm
Carving bar
25AP
589 mm
4.5 kg
D.C. 36 V
1/4"
60
9
GEB071-5
15