Pioneer AVIC-HD1BT Installation Manual page 11

The navigation unit
RCA connector 1
Power cord
Yellow/black
If you use equipment with a mute function, connect that equipment to the
Audio Mute lead. If not, keep the Audio Mute lead free of any connections.
Note:
Audio source will be set to mute or attenuate, while the following sounds
will not be muted or attenuated. For details, see the Operation Manual.
- voice guidance of the navigation
- incoming Ringtone and incoming voice of the mobile phone that is
connected to this navigation system via Bluetooth wireless technology
Note:
The aerial will automatically retract, yet the timing
varies depending on the setting. (Refer to page 5.)
For more detailed information on changing the "Auto
ANT" mode, refer to "Switching the auto aerial
setting" in the Operation Manual.
Blue (*6)
The pin position of the ISO connector will differ
depending on the type of vehicle. Connect *6 and
*7 when Pin 5 is an aerial control type. In
other types of vehicle, never connect *6 and *7.
Note:
Cords for this navigation system and those for other
products may be different colors even if they have
the same function. When connecting this navigation
system to another product, refer to the supplied
manuals of both products and connect cords that
have the same function.
Blue (*7)
To Auto-aerial relay control terminal
(max. 300 mA 12 V DC).
(*8)
10