Husqvarna ROYAL 47RC Operator's Manual page 12

WARNING!
Before cleaning, servicing or repairing
the lawnmower ALWAYS remove the
safety key to prevent unintentional
starting. Ensure the charger cable has
been disconnected.
IMPORTANT
Never use water for cleaning your
lawnmower. Do not clean with chemical,
including petrol, or solvents - some can
destroy critical plastic parts.
Cleaning
1. Remove grass from under the deck
with a brush (Q1 and Q2).
Q1
2. Using a soft brush - remove grass
clippings from the deck (Q3), cutting
height adjustment area, grassbox and
ejection chute (Q4).
Q3
3. Wipe over the surface of your
lawnmower with a dry cloth.
Always handle the blade with care -
sharp edges could cause injury.
USE GLOVES
Renew your metal blade after 50 hours
mowing or 2 years whichever is the
sooner - regardless of condition.
If the blade is cracked or damaged
replace it with a new one.
English - 7
MAINTENANCE
Q2
Q4
Cutting System (R)
Removing the Blade
1. Use spanner to
loosen blade bolt
by turning anti-
clockwise.
2. Remove the blade bolt, blade.
3. Inspect for damage and clean as
necessary.
Fitting the Blade
1. Fit the blade to the machine with the
sharp edges pointing away from the
machine.
2. Re-assemble blade bolt through blade.
3. Hold firmly and tighten blade bolt firmly
with a spanner. Do not over tighten.
Changing the battery
1. Contact your local approved service
centre when the batteries need to be
replaced.
2. Do not change the batteries yourself.
3. The batteries are sealed lead batteries
that contain corrosive acid. If the acid
should come into contact with the
eyes, rinse thoroughly with plenty of
water and seek medical attention. If the
acid comes into contact with the skin,
rinse thoroughly with plenty of water
and protect the eyes from possible
splashing.
R