Connecting The Units - Pioneer DVH-P500UB Installation Manual

Connecting the Units

Connecting the Units
Connecting to separately sold power amp
Front output
Rear output
This product
Subwoofer output
Blue/white
Connect to system control terminal of the
power amp (max. 300 mA 12 V DC).
Blue/white (7*)
Blue/white (6*)
Connect to auto-antenna relay control
terminal (max. 300 mA 12 V DC).
The pin position of the ISO connector will
differ depends on the type of vehicle.
When you connect separately sold multi-channel
Connect 6* and 7* when Pin 5 is an
processor (e.g. DEQ-P6600) to this unit, do not
antenna control type. In another type of
connect anything to the speaker leads and system
vehicle, never connect 6* and 7*.
remote control (blue/white).
:
When you connect multi-channel processor to
this unit, separately sold power amp must be
connected to multi-channel processor.
Note:
Change the initial setting of this product (refer
to the Operation Manual).
The subwoofer output of this unit is monaural.
Power amp (sold
separately)
Connect with RCA cables
(sold separately)
Power amp (sold
separately)
Power amp (sold
separately)
System remote control
Left Right
Front speaker
Front speaker
Rear speaker Rear speaker
Subwoofer Subwoofer
Perform these connections when
using the optional amplifier.
When connecting with a multi-channel processor
Rear view camera
Not used
To video output
AV system display
(e.g. AVX-7600)
Video input 2
(sold separately)
(VIDEO 2/BACK
CAMERA INPUT)
Video input
RCA cable
(VIDEO INPUT)
(sold separately)
RCA cable
(supplied)
RCA cable
This product
(supplied with multi-
channel processor)
15 cm
Video output
DEQ output
Black
(VIDEO OUTPUT)
Blue
Optical cable connection
box (supplied with multi-
Optical cable
channel processor)
(supplied with multi-
channel processor)
Blue
Blue
Black
If AV system display (e.g. AVX-7600)
is combined with this unit, connect the
Multi-channel processor
(DEQ-P6600) rear view camera to the AV system
display. For details concerning
(sold separately)
connection methods, refer to AV system
display's instruction manual.
If AV system display is not combined
with this unit, connect the rear view
Black Blue camera to this unit's video input. For
details concerning connection, refer to
Multi-CD player
When connecting with a rear view
IP-BUS cable
(sold separately)
camera.
IP-BUS cable
(supplied with multi-channel
processor)
Connecting and installing the Installing the optical cable
optical cable connection box
connection box
• When installing the optical cable
WARNING
• Avoid installing this unit in locations where the connection box with the hook and
operation of safety devices such as airbags is pre-
loop fastener.
vented by this unit. Otherwise, there is a danger of
Install the optical cable connection box
a fatal accident.
• Avoid installing this unit in locations where the using the hook and loop fastener in the
operation of the brake may be prevented.
ample space of the console box.
Otherwise, it may result in a traffic accident.
• Fix this unit securely with the hook and loop fas-
tener or lock tie. If this unit is loose, it disturbs dri-
1.5 m ving stability, which may result in a traffic acci-
dent.
CAUTION
• Install this unit using only the parts supplied with
this unit. If other parts are used, this unit may be
damaged or could dismount itself, which leads to
an accident or other problems.
• Do not install this unit near the doors where rain-
water is likely to be spilled on the unit. Incursion
• When installing the optical cable
of water into the unit may cause smoke or fire.
connection box with the lock tie.
Connecting the optical cable
Wrap the optical cable and connection
box with the protection tape and fasten
1. Connect the optical cable and
with the power code using the lock tie.
ground lead to the main unit.
Connect the optical cable so that it does
not protrude from the unit, as shown in
the illustration. Fasten the ground lead
to the protrusion on the back of the
unit.
Screw
2. Connect the optical cable to the
optical cable connection box.
Optical cable
<ENGLISH> <ENGLISH>
Hook fastener
Loop fastener
Wrap with the protection tape
Fasten with the lock tie