Additionally Securing The Rubber Grip; Adjusting The Basic Position Of The Clutch Lever; Checking/Correcting The Fluid Level Of The Hydraulic Clutch - KTM 125 SX EU Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.45

Additionally securing the rubber grip

11.46

Adjusting the basic position of the clutch lever

11.47

Checking/correcting the fluid level of the hydraulic clutch

Info
The fluid level rises with increasing wear of the clutch lining discs.
Preparatory work
–
Check the rubber grip. (
Main work
–
Secure the rubber grip at two points using the securing wire.
Securing wire (54812016000)
Wire twister forceps (U6907854)
The twisted wire ends face away from the hands and are bent toward the rub-
ber grip.
401198-01
(All 125/150 models)
–
Adjust the basic setting of the clutch lever to your hand size by turning adjust-
ing screw
101698-10
(All 250/300 models)
–
Adjust the basic setting of the clutch lever to your hand size by turning adjust-
ing screw
L01224-10
(All 125/150 models)
–
Move the clutch fluid reservoir mounted on the handlebar to a horizontal posi-
tion.
–
Remove screws
–
Remove cover
–
Check the fluid level.
Fluid level under top edge of con-
tainer
L00953-10
» If the level of the fluid does not meet specifications:
–
–
Position the cover with the membrane. Mount and tighten the screws.
p. 62)
.
1
Info
Turn the adjusting screw counterclockwise to increase the distance
between the clutch lever and the handlebar.
Turn the adjusting screw clockwise to decrease the distance between
the clutch lever and the handlebar.
The range of adjustment is limited.
Turn the adjusting screw by hand only, and do not apply any force.
Do not make any adjustments while riding!
.
1
Info
Turn the adjusting screw counterclockwise to decrease the distance
between the clutch lever and the handlebar.
Turn the adjusting screw clockwise to increase the distance between the
clutch lever and the handlebar.
The range of adjustment is limited.
Turn the adjusting screw by hand only, and do not apply any force.
Do not make any adjustments while riding!
.
1
with membrane
2 3
Correct the fluid level of the hydraulic clutch.
Hydraulic fluid (15) ( p. 125)
.
4 mm (0.16 in)
63