GE EER3000 Owner's Manual page 25

Oven Shelves
If your oven is equipped with shiny,
silver-colored oven shelves, they should
be removed from the oven before
beginning the self-clean cycle. Clean
with an abrasive cleanser or scouring pad.
After cleaning, rinse the shelves with
clean water and dry with a clean cloth.
If your oven is equipped with gray
porcelain-coated oven shelves, they
may be cleaned in the oven during
the self-clean cycle.
Removable Warming Drawer Pan
NOTE: For models with an electric warming
drawer, before performing any adjustments,
cleaning or service, disconnect the range
electrical power supply at the household
distribution panel by removing the fuse or
switching off the circuit breaker. Make sure
the drawer heating element is cool.
NOTE: Allow warming drawer to cool before
removing pan.
NOTE: Wipe spills promptly after each use.
Stainless Steel Surfaces
Do not use a steel wool pad; it will scratch
the surface.
To clean the stainless steel surface,
use warm sudsy water or a stainless steel
cleaner or polish. Always wipe the surface
in the direction of the grain. Follow the
cleaner instructions for cleaning the
stainless steel surface.
NOTE: The shiny, silver-colored oven shelves (on
some models) may be cleaned in the self-cleaning
oven. However, the shelves will darken in color,
lose their luster and become hard to slide if
cleaned during the self-cleaning cycle.
To make the shelves slide more easily,
apply a small amount of vegetable oil
to a paper towel and wipe the edges
of the oven shelves with the paper towel.
Do not spray with Pam
lubricant sprays.
s
Warming drawer has a removable pan
for easy cleaning. Clean with hot soapy
water and a sponge or dish towel. Dry
with a clean cloth. Replace the pan in
the lower oven drawer.
(on some models)
To inquire about purchasing stainless
steel appliance cleaner or polish, or to
find the location of a dealer nearest you,
please call our toll-free number:
National Parts Center
ge.com
ge.com
® or other
1.800.626.2002
25