GE SG SERIES 10 Operating Manual page 25

g
Load on phases screen 2
This screen displays for each phase:
The Load active power (kW) (for RPA: total value of Parallel System).
The Load apparent power (kVA) (for RPA: total value of Parallel System).
scellaneous screen
Mi
This screen displays:
The temperature of the Inverter Bridge.
The total operating time for the UPS (in hours).
The total operating time for the Inverter (in hours).
Utility Faults Statistics screen
This screen displays:
The total number of minor Utility faults (Bypass Utility out of tolerance faults).
The total number of major Utility faults (Rectifier Utility out of tolerance faults).
The total number of detected output overloads.
UPS identification screen
This screen displays:
The UPS family and the power range.
The software version.
The serial number.
OPM_SGS_USM_10K_40K_0US_V010.doc
metering
LOAD ON PHASES
L1= 6.72kW
alarms
L2= 5.84kW
L3= 6.08kW
parameters
metering
MISCELLANEOUS
InvHeatsink
alarms
UpsOperTime=
InvOperTime =
parameters
metering
UTILITY FAULTS STAT.
Minor =
alarms
Major =
Overloads=
parameters
metering
UPS IDENTIFICATION
SG Series S0 30kVA
alarms
SW Version: x.xx
S/N: P0030-2003-0001
parameters
25/88
+
8.40kVA
–
7.30kVA
7.60kVA
ok
+
= 45 C
–
3125h
2135h
ok
+
43210
–
11267
654
ok
+
–
ok
Operating Manual SG Series 10, 20, 30 & 40 kVA
GE