GE SG SERIES 10 Operating Manual page 24

g
Rectifier Utility data screen
This screen refers to the AC source supplying the Rectifier.
This screen displays:
Iout1 = output current Rectifier Bridge.
Iout2 = output current 2
The voltage levels between the three phases (line-to-line).
The input frequency of the Rectifier.
Inverter data screen
This screen displays:
The voltage level of the three phase voltages (line-to-neutral).
The output frequency of the Inverter.
The synchronization status of the Inverter with respect to Utility.
Status Load screen
This screen displays:
The Load level in kVA (for RPA: only this unit).
The Load level as a percentage of the nominal rated Load (for RPA: only this unit).
The source of the power supplied to the Load.
Load on phases screen 1
This screen displays for each phase:
The output phase voltage and current as RMS values (for RPA: total value of Parallel
System).
The output Load as percent (for RPA: respect to the rated power of Parallel System).
OPM_SGS_USM_10K_40K_0US_V010.doc
nd
Rectifier Bridge (optional 12 pulse Rectifiers only).
m etering
REC TIFIER
U 12=481V Iout1 =107A
alarm s
U 23=480V Iout2 =
U 31=482V f=60.0Hz
param eters
metering
INVERTER:
U2= 277V
alarms
Frequency = 60.0Hz
Synchronized
parameters
metering
LOAD ON UPS
Load =
alarms
Percentage =
LOAD ON INVERTER
parameters
metering
LOAD ON PHASES
U1=277V I=30A
alarms
U2=277V I=26A
U3=277V I=27A
parameters
24/88
+
–
0A
ok
+
U1=277V
U3=277V
–
ok
+
25.20kVA
–
84%
ok
+
84%
–
73%
76%
ok
Operating Manual SG Series 10, 20, 30 & 40 kVA
GE