Aligning Drive Rolls And Wire Guide - Miller Electric MPi 220P Owner's Manual

4-9. Aligning Drive Rolls and Wire Guide

Tools Needed:
2.5 mm
Notes
OM-253 918 Page 18
Correct
4
3
2
1
Incorrect
5
! Turn off and disconnect in-
put power
View is from top of drive rolls
looking down with pressure
assembly open.
1 Drive Roll Securing Nut
2 Drive Roll
3 Wire Guide
4 Welding Wire
5 Drive Gear
Insert screwdriver, and turn screw
in or out until drive roll groove lines
up with wire guide.
Close pressure roll assembly.
Ref. 800 412-A
Work like a Pro!
Pros weld and cut
safely. Read the
safety rules at
the beginning
of this manual.