Sanyo PLC-XE32 Owner's Manual page 46

Setting
To Enter the Logo PIN code
Select a number by pressing the Point
And then press the Point
and move the pointer. The number changes to "".
If you fixed an incorrect number, move the pointer
to the number you want to correct by pressing the
Point button, and then select the correct number
◄
by pressing the Point
Repeat this step to complete entering a four-digit
number.
After entering the four-digit number, move the
pointer to "Set" by pressing the Point
Press the SELECT button so that you can change
the Logo PIN code lock setting.
If you entered an incorrect Logo PIN code, "Logo
PIN code" and the number (    ) turns red.
Enter a Logo PIN code all over again.
To Change the Logo PIN code
Logo PIN code can be changed to your desired
four-digit number. Select "Logo PIN code change"
with the Point
button. Set a new Logo PIN code.
Be sure to note the new Logo PIN code and keep it
at hand. If you lost the number, you could no longer
change the Logo PIN code setting. For details on
PIN code setting, refer to relevant instructions of the
PIN code lock function on pages 48 and 49.
CAUTION:
WHEN YOU HAVE CHANGED THE LOGO PIN
CODE, WRITE DOWN THE NEW PIN CODE
IN COLUMN OF THE LOGO PIN CODE NO.
MEMO ON PAGE 65, AND KEEP IT SECURELY.
SHOULD THE LOGO PIN CODE BE LOST OR
FORGOTTEN, THE LOGO PIN CODE SETTING
CAN NO LONGER BE CHANGED.
44
button to fix the number
►
buttons.
▲▼
button and press the SELECT
▼
Logo PIN code lock Dialog Box
buttons.
▲▼
After a correct Logo PIN code is entered, the
following dialog box appears.
button.
►
Select On/Off by pressing the Point◄►
buttons or change the Logo PIN code.