Connecting To Component Video And Rgb(Scart) Equipment - Sanyo PLC-XE32 Owner's Manual

Connecting to Component Video and RGB (Scart) Equipment
Cables used for connection
• Audio Cables (Mini Plug :stereo)
• Scart-VGA Cable
• Component Cable
• Component-VGA Cable
( Not all the cables are supplied with this projector.)
Audio Output RGB Scart
1-pin Output
Scart-VGA
cable
Audio cable
(stereo)
COMPUTER IN 1 /S-VIDEO IN
/COMPONENT IN
COMPONENT/
COMPUTER
AUDIO IN

Note:
• When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available.
• RGB Scart signal can not be output from the OUTPUT terminal.
• See page 63 for ordering optional cables.
Unplug the power cords of both the projector and external equipment from the AC outlet
before connecting cables.
Component Video Output
(Y, Pb/Cb, Pr/Cr)
Component
cable
External Audio Equipment
Audio Input
Audio cable
(stereo)
AUDIO OUT
(stereo)
Installation
17