GE JTP20 Installation Instructions Manual page 6

Installation Instructions
Cutout for Double Built-In Oven
A2
ALLOW 11/16"
FOR OVERLAP
Allow 11/16" for
OF THE OVEN
overlap of oven
OVER SIDE EDGES
over side edges
OF CUTOUT
of cutout
BETWEEN INSIDE
ALLOW A MINIMUM OF 21"
Allow a minimum of
FOR CLEARANCE TO
21" for clearance to
ADJACENT CORNERS,
adjacent corners,
DRAWERS, WALLS ETC.
drawers, walls, etc.
WHEN THE DOOR
when door is open
IS OPENED.
overlap of oven
ALLOW 1" FOR
ON OVEN TOP
AND BOTTOM
21"
21"
f the cabinet does not have a solid bottom,
two braces or runners must be installed
level with the bottom of the cutout to
support the weight of the oven. For double
ovens, the runners and braces must
support 275 lbs.
NOTE: If marks, blemishes or the
cutout opening are visible above the
installed oven, it may be necessary to
add wood shims under the runners and
front trim until the marks or opening
are covered.
Cutout
CUTOUT
Width
WIDTH
28 1/2" Min.
28 1/2" MIN.
28 5/8" Max.
28 5/8" MAX.
Opening
Between
Inside Walls THE OPENING
Must Be
WALLS MUST
At Least
BE AT LEAST
28 1/2" Wide
28 1/2"WIDE
Cutout
CUTOUT
Allow 1"
Height
HEIGHT
minimum for
51 13/16" Min.
51 13/16" MIN.
51 15/16" MAX.
51 15/16" Max.
top and 1 1 ⁄ "
4
OVERLAP
overlap of
oven bottom
OF CUTOUT of cutout
Recommended
RECOMMENDED
CUTOUT LOCATION
minimum cutout location
30" 30"
12" FROM THE FLOOR
from floor 12"
Cabinet
CABINET
WIDTH Width
Cabinet Width
5"
5"
Recommended
Minimum
Junction Box
JUNCTION BOX Cutout Location
Location
LOCATION
from Floor
Cutout Depth
Cutout Width
47" to
47" TO Cutout Height
Bottom of
BOTTOM OF
JUNCTION BOX
Junction Box
Suitable
Bracing
to Support
SUITABLE
Runners
BRACING
TO SUPPORT
RUNNERS
6
30"
12"
23 1/2" Min.
28 1/2" Min.
28 5/8" Max.
51 13/16" Min.
51 15/16" Max.
NOTE: If the cabinet does not
have a front frame and the
sides are less than 3/4" thick,
shim both sides equally to
establish the cutout width.
C L
21 5/8"
21 5/8"
OVER CENTERLINE
Over Centerline
OF CABINET
of Cabinet
2" x 4" or
2" x 4" or
EQUIVALENT equivalent
RUNNERS
runners
level with
bottom
of cutout