Names And Functions Of Parts (Front Panel) - Sanyo DSR-3716 Instruction Manual

Names and functions of parts (front panel)

DSR-3716
1 2
7
8
9
1
Power indicator (POWER)
On: The power cord at the rear panel of the DVR is inserted in
the outlet.
Off: The power cord on the rear panel of the DVR is not
inserted in the outlet.
Fast blinking: Hard disk error.
Slow blinking: Cooling fan error.
If the indicator is blinking, contact the store where you
purchased the DVR.
2
Remaining capacity warning indicator (FULL) (P46)
(Normal recording area)
On: When recording on the hard disk has become impossible.
Blinking: The available hard disk space dropped to the
specified level.
Off: The available disk space is reset by initialization or by
allowing overwrite.
3
Remaining alarm capacity warning indicator (ALARM
FULL ) (P46) (Alarm recording area)
On: When recording on the hard disk has become impossible.
Blinking: The available hard disk space dropped to the
specified level.
Off: The available disk space is reset by initialization or by
allowing overwrite.
4
Lock indicator (LOCK) (P66) (Security lock)
On: The operation has been locked using the security lock.
Off: The password of a valid administrator is entered to release
the lock (a buzzer will sound).
5
Alarm indicator (ALARM)
On: Pre-alarm recording.
Blinking: Alarm recording.
6
Function button and indicator (FUNC.) (P73)
On: Function mode (switching to dome camera control).
Off: Normal control mode.
3 4 5
F
6
G H I J
7
Audio output terminal (AUDIO OUT)
The audio output is the same as that of the rear panel AUDIO
OUT terminal.
8
Video output terminal (VIDEO OUT)
The video output is the same as that of the rear panel MAIN
MONITOR OUT terminal.
9
USB terminal (USB)
This terminal connects to an optional CD-R/RW drive.
When the front panel and the rear panel terminals are
connected simultaneously, the front panel is given priority.
F
Camera selection buttons and indicators
On: The camera is selected, or in multi-screen mode, the
indicator is on for each selected camera.
Blinking: Video-loss or an alarm detected.
When "K" is displayed in the upper right corner of the screen a
value can be input. (P33)
(DSR-3709)
G
Quad-screen display button and indicator (QUAD) (P15)
On: Quad-screen display.
Off: Other operation is selected.
H
Monitor 2 button and indicator (MON2) (P16)
On: Monitor 2 operation.
Off: Other operation is selected.
I
Plus screen button and indicator (PLUS) (P15)
On: When the image of one camera is enlarged to the size of a
quad screen as the multi screen (9/16) is displayed.
Off: Pressing the PLUS button again will display the previous
screen.
J
Multi-screen button and indicator (MULTI) (P15)
On: Multi-9 or multi-16 screen display.
Off: Other operation is selected.
Foreword 8