Auto-Monitor (Vt04) - Fluke VT04 User Manual

Auto-Monitor (VT04)

The Auto-Monitor feature is similar to the alarm feature. The difference is that
instead of a flashing warning, the VT04 saves an image. When the temperature
of an object in the scene goes above or below the threshold value, the VT04
saves the image.
By default, the file name for these captured images includes an A, for example,
XXXA.is2.
Measurements are the scene temperature (area shown inside the
markers).
To set the Auto-Monitor:
To stop the Auto-Monitor:
Shop for Fluke products online at:
The Auto Off feature is disabled in the Auto-Monitor mode.
The Auto-Monitor feature is disabled when the Product is
connected to power.
MyFlukeStore
www.
Note
(-10 °C to +250 °C)
(15 min, 30 min,
1 hr, 2 hr, 4 hr, 8 hr)
Note
Visual IR Thermometer
Menu Functions
1.877.766.5412
.com
21