Warranty - Fluke CO-220 Instruction Sheet

CO-220 English Instruction Sheet
Calibration or Service
The Meter should be calibrated once a year by an authorized
Fluke service center.
During normal use, the Meter does not require adjustment.
Any required adjustments are made at calibration. To replace the
sensor, contact an authorized Fluke service center.

Warranty

LIMITED WARRANTY & LIMITATION OF LIABILITY
This Fluke product will be free from defects in material and
workmanship for one year from the date of purchase. This warranty
does not cover fuses, disposable batteries or damage from accident,
neglect, misuse or abnormal conditions of operation or handling.
Resellers are not authorized to extend any other warranty on Fluke's
behalf. To obtain service during the warranty period, send your
defective tester to the nearest Fluke Authorized Service Center with a
description of the problem.
THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER
WARRANTIES, SUCH AS FITNESS FOR A PARTICULAR
PURPOSE, ARE EXPRESSED OR IMPLIED. FLUKE IS NOT LIABLE
FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY
CAUSE OR THEORY. Since some states or countries do not allow the
exclusion or limitation of an implied warranty or of incidental or
consequential damages, this limitation of liability may not apply to you.
Fluke Corporation
P.O. Box 9090
Everett, WA.
98206-9090
10/96
Page 8
Fluke Europe B.V.
P.O. Box 1186
5602 B.D. Eindhoven
The Netherlands