Table of Contents
Advertisement
CNX 3000
Users Manual
Switch
Button
Position
Not related to
switch position
All positions
Not related to
switch position
Not related to
switch position
Not related to
switch position
[1]
This function will stay in ac or dc when the function switch is moved to another position and back to this function. Even when turned to off and back to
this function.
[2]
This button is used when the Product connects with a wireless module. See the "Discovery of Modules" section to learn more.
12
Table 5. Pushbuttons (cont.)
Push once to turn on the backlight and push again to turn off the backlight. The backlight
turns off automatically after 2 minutes.
Starts the MIN MAX record function. Steps the display through MAX, MIN, AVG (average),
and input signal measurement. Push for 1 second to stop MIN MAX record.
Selects/deselects the highlighted wireless module in the display. Hold for 1 second to bind
all selected modules to the Product and stop the discovery procedure.
Moves the highlight in the display to the next wireless module shown in the display.
Turns on the radio and starts the module discovery procedure. shows in the display
when the radio is on. Turns off the radio when the radio is on.
MyFlukeStore
www.
Shop for Fluke products online at:
Function
[2]
1.877.766.5412
.com
[2]
[2]
Advertisement
Table of Contents
