Kenwood TK-2102G Service Manual page 24

TK-2102G
Item Condition
5. MIC 1) TEST CH: Center
Sensitivity AG: 1kHz/12mV
PTT: ON
[Wide]
[Narrow] 2) TEST CH: Center
PTT: ON
6. QT 1) TEST CH: High
Deviation QT: 67.0Hz
LPF: 3kHz
[Wide] HPF: OFF
PTT: ON
[Narrow] 2) TEST CH: High
PTT: ON
7. DQT 1) TEST CH: High
Deviation DQT: D023N
LPF: 3kHz
[Wide] HPF: OFF
PTT: ON
[Narrow] 2) TEST CH: High
PTT: ON
8. Battery 1) BATT terminal voltage: 5.8V
Warning
Level
24
ADJUSTMENT
Measurement
Test-
Unit Terminal Unit
equipment
Power TX-RX ANT
meter SP/MIC
Deviation connec-
meter tor
Oscillo-
scope
AG
AF VTVM
Power ANT
meter
Deviation
meter
Oscillo-
scope
AG
AF VTVM
DVM ANT
BATT
termi-
nal
Adjustment
Parts Method
Check ±2.2kHz~3.8kHz
±1.1kHz~1.9kHz
Program- 0.90kHz ±0.03kHz
ming
software:
KPG-55D
(Windows
version:
ver.4.00
0.43kHz ±0.03kHz
or later)
0.85kHz ±0.03kHz
0.40kHz ±0.03kHz
Adjust the adjust- The LED must blink.
ment value until the
LED starts to blink.
Specifi cations / Remarks