Oven Light - GE Spacemaker JVM240 Use And Care Manual

To replace
combination
light, first
disconnect power
at main fuse or
panel or pdl plug.
Remove screw on right side of light compartment
cover and lower rover until it stops.

Oven Light

To replace your oven light, first
disconnect power at main fuse
or circuit breaker panel or pu~
plug. Remove the top grill by
taking out the 2 screws that hold
it in place.
30
Be sure btibs to
be replaced are
cool before
removing. Break
the adhesive seal by
gently unscrewing
the bulbs. Replam
with 40-watt
incandescent bdbs ~02X4253) available from
your GE supplier. High intensity 40-watt bulbs
hardware stores, may dso be used for replacements.
Raise light compartment wver and replace screw.
Connect electrierd power to microwave oven.
Next, remove the singIe screw
of oven that secures light housing.
Replace burned-out bdb with
a 30-watt inmndescent bulb
your GE supplier.
-
Clean off the grease and dust on
hood surfaces often. Use a solution
of warm water and detergent.
About 1 tablespoon of ammonia
may be added to the water. Take
enamel surfaces with this solution;
ammonia will darken metal.