Problem Solver - GE Spacemaker JVM230 Use And Care Manual

PROBLEM
OVEN WILL NOT
COME ON
CONTROL PANEL
LIGHTED, YET OVEN
WILL NOT START
FLOOR OF THE OVEN
IS WARM, EVEN
WHEN THE OVEN
HAS NOT BEEN USED
• Steam or vapor escaping from around the door.
• Light reflection around door or outer case.
• Dimming oven light and change in blower sound
may occur while operating at power levels other
than high.
If you need more help...call, toll free: GE Answer Center
QUESTIONS?
USE THIS PROBLEM SOLVER
POSSIBLE CAUSE
• A fuse in your home may be blown or the circuit breaker tripped. Replace fuse or
reset circuit breaker.
• Unplug your microwave oven, then plug it back in.
• Make sure 3-prong plug on oven is fully inserted into wall receptacle.
• Door not securely closed.
• START pad must be touched after entering cooking selection.
• Another selection entered already in oven and CLEAR/OFF pad not touched to
cancel it.
• Make sure you have entered cooking time after touching MICRO COOK pad.
• CLEAR/OFF pad was touched accidentally. Reset cooking program and touch
START pad.
• The cooktop lamp is located directly below the oven floor. When the lamp
is on, the heat it produces makes the oven floor get warm. This is normal.
All these things are normal with your microwave oven:
• Dull thumping sound while oven is operating.
• Some TV-Radio interference might be noticed
while using your microwave oven. It's similar to
the interference caused by other small appliances
and does not indicate a problem with your oven.
® / 800.626.2000 / consumer information service
25