Dirt Sensor - Kenmore 116.21714 Use & Care Manual

MANGUERA & ACCESORIOS
Interruptor de encendido/
apagado de tres posiciones
(OFF/FLOOR/CARPET)
(Apagado/Piso/Alfombra)
Control de
succión
electr nico ó
Herramienta
para hendiduras
Cepillo para
combinación
POWERMATE
Indicador de nivel
Números de serie
de pelo de la alfombra
y modelo de
PowerMate
(Parte inferior)
Pedal de
liberación
del mango
Pedal de selección
de nivel de pelo
de la alfombra Botón de
BELT RESET
TUBO TELESCOPICO
Mango
Dispositivo
giratorio de
la manguera
Luz
Detector de polvo
Luz y Lente
Protector de
muebles
Luz de
BELT RESET
Correa
Limpiador de
orillas (no mostrado)
6
Although the dirt sensor feature in your
Kenmore PowerMate
years of trouble free use, the passage of
dirt through the air passage system can
coat the lenses causing the green light to
come on and stay on - never switching to
red. When this happens the lenses must
be cleaned.
Botón de
CAUTION
ajuste de
extensión Never use water or any cleaning solution
when cleaning the lenses. The residue of
the water or cleaners will accelerate the
recoating of the lenses and make cleaning
necessary sooner.
TO CLEAN THE LENSES
Reborde
1. Remove the wand from the PowerMate
by pressing the quick release pedal and
lifting up on the wand.
Pedal de
liberación
rápida del
tubo
Wand
Quick
Release
Pedal

DIRT SENSOR

2. As indicated by the illustration, the two
dirt sensor elements are located on the
is designed for
®
inside of the swivel, approximately 4
inches/10 cm down, (note the arrows).
Each element should be cleaned periodi-
cally. To reach the sensor elements, use a
small brush such as a bottle brush. Brush
each sensor element several times to
remove dust and dirt.
2. Reinstall the wand after cleaning the
sensors.
27
Cross Section View
Approx.
4 inches
or 10 cm
Sensor
Elements