Installation
1.
Reverse the removal procedure. Make sure
the lug ( ) on the fork leg is located in the
5
slot ( ) in the brake panel.
6
2.
Torque the front axle nut to:
35 lbf·ft (46 N·m , 4.8 kgf·m)
3.
Check front brake adjustment (page
If a torque wrench was not used to install the
wheel, see your dealer as soon as possible to
verify proper assembly. Improper assembly
may lead to loss of braking capacity.
86
).
Wheels
93
Servicing Your Honda