Download Print this page

American Dynamics SensorRail AD1100 User Manual

American dynamics ultra programmable dome user guide

Advertisement

Quick Links

SensorRail
ADRL3TRK Series
®
SpeedDome
Ultra Programmable
Dome on a Rail
User Guide

About this Manual

This user manual describes how to operate the
SensorRail™ IIIe system using AD matrix
switchers and controllers. This guide does not
explain how to:
• Operate matrix switchers and controllers. See
instructions included with the device.
• How to install the product. See Installation
Guide 8200-0593-02
• Service the system. See Service Guide 8200-
0593-03.

Product Description

The SensorRail IIIe system enables a SpeedDome
Ultra dome camera to transmit video as it moves
along a rail to the ideal surveillance position. The
system consists of:
• Camera trolley that includes a SpeedDome
Ultra VII dome camera, an electronic positioning
board, and an RF video link system.
• A rail that the camera trolley runs along.
• PowerRail module that supplies dc power to the
trolley and converts data.
© 2006 Sensormatic Electronics Corp.
SENSORRAIL IIIe
USER GUIDE
IIIe
The SensorRail IIIe system is compatible with all
current AD matrix switchers and controllers.
Communication between the control device and the
rail system is done using an AD RS-422 protocol.
Note: The matrix switcher perceives the rail as a
dome camera. Therefore, all dome features are
available except privacy zone, competitor's dome
protocols, home position, direction indicators,
freeze frame, and iris features.
Controlling the Rail System
The following devices can be used to control the
dome camera as it moves along the rail:
• AD Keyboard (AD2079 / AD2088 / AD2089)
• ADTTE / ADTT16E Touch Tracker
• VM96 Matrix Switcher
• MegaPower LT
• AD200/300/1100.
Depending on the camera trolley configuration, you
move the trolley along the rail by using the Iris
OPEN/CLOSE keys (or Focus NEAR/FAR keys) on
the Touch Tracker or AD keyboard.
• Press iris OPEN (or focus NEAR) to move the
trolley forward.
• Press iris CLOSE (or focus FAR) to move the
trolley backward.
Note: Dome Auto-Focus mode is available by
simultaneously pressing the iris OPEN and CLOSE
keys.
SpeedDome Ultra VIII: If this dome is
installed in the trolley, the following
features are not recommended:
• Privacy Zones
• Direction Indicators.
• Freeze frame
• Home position
Even if these features are operational,
their function depends on the dome
remaining stationary.
1 of 2
®
IRIS
FOCUS
8200-0593-04 B0

Advertisement

loading

Summary of Contents for American Dynamics SensorRail AD1100

  • Page 1: About This Manual

    SensorRail ™ IIIe ADRL3TRK Series ® SpeedDome Ultra Programmable Dome on a Rail User Guide About this Manual This user manual describes how to operate the SensorRail™ IIIe system using AD matrix switchers and controllers. This guide does not explain how to: •...
  • Page 2: Programming Presets

    Programming Presets Using the keyboard, select the monitor and dome camera, then move the trolley to the desired location and define the preset. Programming Patterns Patterns are a series of pan, tilt, zoom, and position settings (including the trolley position on the rail).

This manual is also suitable for:

Sensorrail ad200Sensorrail ad2079Sensorrail ad2088Sensorrail ad300Sensorrail iiie adrl3trk series