Yamaha YZ250(W)/W1 Owner's Service Manual page 460

HANDLEBAR
2. Install:
9 Grip cap (upper) 1
9 Grip cap (lower) 2
9 Bolt (grip cap) 3
NOTE:
Temporarily tighten the bolts (grip cap).
EC5B5210
Handlebar
1. Install:
9 Handlebar holder (lower) 1
9 Plain washer 2
9 Nut [handlebar holder (lower)] 3
NOTE:
9Install the handlebar holder (lower) with its side
having the greater distance a from the mount-
ing bolt center facing forward.
9Apply the lithium soap base grease on the
thread of the handlebar holder (lower).
9Installing the handlebar holder (lower) in the
reverse direction allows the front-to-rear offset
amount of the handlebar position to be
changed.
9Do not tighten the nut yet.
2. Install:
9 Handlebar 1
9 Handlebar holder (upper) 2
9 Bolt [handlebar holder (upper)] 3
5-45
CHAS
28 Nm (2.8 m•kg, 20 ft•lb)