Combination floor head (some models only) Other Information 20 Turbobrush (some models only) Guarantee 21 Hard floor tool (some models only) NOTE: Some parts may vary according to model. Please check inside flap of box for more details. vax.co.uk vax.co.uk...
If the supply cord is damaged return the vacuum cleaner to a Vax authorised Service Agent or a suitably qualified person for examination, repair or adjustment. 11. Do not pull or carry this appliance by the cord. Do not use the cord as a handle, close a door on the cord or pull NOTE: The Turbobrush, hard floor tool, crevice tool, upholstery tool and dusting brush can all be attached directly to the telescopic the cord around sharp edges or corners.
Cleaning the post-motor filter Cleaning the pre-motor filter 40 C max 24hr Wash filters with warm water (40ºC MAX) at least every 3 months for best cleaning results. Do not use the vacuum cleaner without all of the filters in place. vax.co.uk...
To re-assemble the TurboTool, ensure that What do I do if the unit/an accessory becomes damaged or broken? the tabs are engaged • We’re here to help. Simply call 0844 412 8455 or visit vax.co.uk Tabs and pivot the lower housing closed.
Any queries or concerns about using your Vax, simply visit; vax.co.uk/support – vaxireland.ie or call the Vax Careline. Calls are charged at the UK local rate. Please make a note of the serial number and model It’s quick and easy to register for your number of the vacuum cleaner before calling.