Installation - MULTIQUIP GA-9.7HE Operation And Parts Manual

CONNeCTiNg THe gROuNd
The nut and ground terminal on the generator should always
be used to connect the generator to a suitable ground. The
ground cable should be #8 size wire minimum.
At the generator, connect the terminal of the ground cable
between the lock washer and the nut (Figure 2) and tighten
the nut fully. Connect the other end of the ground cable to
a suitable earth ground (ground rod).
page 14 — ga9.7He 60 Hz geNeRaTOR• OpeRaTiON aNd paRTs maNual — Rev. #1 (04/29/10)
AC CIRCUIT BREAKER
for 120V for 120V
15A
GENERATOR
GROUND LUG
REFERENCE
NEC 250-52(C)
Figure 2. Generator Grounding
120 ON ON 9700
V 240
GA-9.7HE
OFF OFF
IDLE CONTROL OPERATION START
SWITCH SWITCH BUTTON
for 240V for 120/240V AC VOLTMETER
30A 20A 30A
OFF OFF
240V 120/240V
120V
35A 35A
AC CIRCUIT
BREAKER
(for main)
GROUND
CABLE
#8 MINIMUM
8 FT. MINIMUM

installatiOn

GROUND ROD
FOR EARTH
GROUND
CONNECT TO
BUILDING
GROUND
IF REQUIRED