Figure 3-27. Configure Submenu; Figure 3-28. Set Scsi Submenu - Compaq SW TL881 DLT Mini-Lib/1 Manual

Figure 3-27. Configure Submenu

4. To select a configuration option, press the
panel until the on the display is next to the option you want to
change. In this case, let us choose Set SCSI. Press the
display the choices for that option. The submenu in Figure 3-28 appears:

Figure 3-28. Set SCSI Submenu

NOTE: Take a moment to look closely at the submenu in Figure 3-28. Note that the
the display is next to line 1, and that line 2 is indented. This tells you that Figure 3-28 is a
two-tiered menu . The and
is typical of many submenus of the Configure Menu. The first level is as follows: If you
press the button, the
back to line 1.
If you press the Enter button while the
buttons operate on the second level. You can tell because the
line 4), and a appears at the end of line 4, indicating that there is a list of settings that
can be scrolled using the
The at the end of line 4 means that there are other items that can be displayed by
scrolling, using the button repeatedly.
5. Note that the Library SCSI ID is set to 0. Suppose you want to set the
DLT0 bus ID to 3. With the
repeatedly until the display scrolls as shown in Figure 3-29:
SHR-1332
or
SHR-1456
buttons work on two levels in this kind of menu, which
moves to line 3. If you press the
is next to line 1 (or line 3), the
and buttons.
next to line 1, press the
Installation 3-35
button on the control
button to
Enter
on
button, the moves
and
moves next to line 2 (or
button