Installation; Installing Policy Server Using The Gui-Mode Installer - HP 3PAR StoreServ 7200 2-node Installation And Setup Manual

4 Installation

This chapter assumes that you have read
the information needed to install Policy Server. You can use either the GUI mode version of the
installer (recommended), described in
(page 13), or the console mode version, described in
(page 34).

Installing Policy Server Using the GUI-Mode Installer

The following procedure takes you through the screens of the GUI-mode installation program. It
assumes that you will install all three options on the same machine and explains only the screens
that appear with that installation.
1. Log in to Windows as an administrator, and then locate the HP3PARPolicyServer.exe file.
Double-click the name of the file to launch the installer.
2. When the Policy Server installation program starts, the first screen displays the information
that you should have collected for the installation (described in
(page 11)). If you have the information, click Next.
3. In the Choose Install Folder screen, keep the default location, and then click Next to display
the HP 3PAR Policy Server Components screen.
4. The HP 3PAR Policy Server installation requires all components to be installed on the same
system. Make sure that all components are selected for installation, and then click Next.
5. In the Database Server Configuration screen, keep the default settings, and then click Next.
6. In the Database Initialization screen, keep the default option of Create new database during
installation, and then click Next.
7. In the Directory Server Configuration screen, keep the default port (389) for the OpenDS
directory server, and then click Next.
If you need to use a different port, you will need to edit the OpenDS configuration file AFTER
installation and BEFORE starting the services. For more information, see the "Editing the
OpenDS Configuration File" section in the HP 3PAR Policy Server Administration Guide.
8. In the Listening Port screen (shown below), no default port number is provided. Enter 443 in
the Port field.
"Preparation for Installation" (page 10)
"Installing Policy Server Using the GUI-Mode Installer"
"Installing Policy Server in Console Mode"
Installing Policy Server Using the GUI-Mode Installer
and collected
"Configuration Information"
13