HP 3PAR StoreServ 7200 2-node Administrator's Manual page 42

NOTE: Environment variables can only be used if the CLI is set up remotely. Environment variables
cannot be used if you are accessing the CLI through SSH.
Table 3 Global CLI Options and Environment Variables
Global Option
sockssl
sys <system_name>
password <encrypw>
pwf <password_file>
user <user_name>
CAUTION: By setting the system name, user name, and password using environment variables, you are not prompted
for this information when running the CLI, which can be useful for scripting. However, passwords must be kept secure.
Using encrypted passwords in scripts, using an encrypted pwfile, or the encrypted password on the command line
raises the risk of password exposure. It is imperative that the script, pwfile, or command line history file be strictly
maintained to avoid compromise of the encrypted password. Failure to do so can leave the user open to impersonation
by anyone with access to the encrypted string.
-nosockssl
csvtable
-listdom
-nohdtot
-hafter
42 Running the HP 3PAR Command Line Interface
Environment Variable Specifies...
that the connection between the client and server is secure.
TPDSOCKSSL
This is the default setting. For additional information, see
"Using SSL" (page
the system name of the system you are accessing. For
TPDSYSNAME
additional information, see
Environment Variable" (page
the encrypted password. This value should be protected for
security purposes. For additional information, see
Your Name and Password" (page
the password file the system references upon starting the
TPDPWFILE
CLI. This value should be protected for security purposes.
For additional information, see
Password" (page
your user name. For additional information, see
Your Name and Password" (page
option also requires specifying the -password option. These
options override the -pwf option.
that the CLI client should attempt to connect to the storage
NOTPDSOCKSSL
server on port 5782, without using SSL. This makes the
connection insecure, and all data including authentication
data passes in plain text packets.
the location of the cache directory where the code that
TPDCACHEDIR
determines the version of the HP 3PAR software on the
system resides. For additional information, see
Client Bytecode" (page
the Tcl script that the system sources before entering the
TPDSTARTFILE
command loop. For additional information, see
Files" (page
that commands that use the table formatting routines will
TPDCSVTABLE
print comma-separated output. For additional information,
see
that domains are listed. For additional information, see
TPDLISTDOM
"Listing Domains" (page
that headers and totals are not printed after commands are
TPDNOHDTOT
executed. For additional information, see
and Totals" (page 50)
the number of lines after which the header is printed again.
TPDHAFTER
For additional information,
(page
44).
"Setting the TPDSYSNAME
45).
"Setting Your Name and
46).
47).
48).
"Comma Separated Values" (page
49).
"Table Headers and Totals"
50).
"Setting
46).
"Setting
46). Specifying the -user
"Caching
"Startup
48).
"Table Headers