Front Fork Inspection; Front Fork Oil Seal And Dust Seal Cleaning - Yamaha YZ85( P) /LC Owner's Service Manual

FRONT FORK OIL SEAL AND DUST SEAL CLEANING

FRONT FORK INSPECTION/

3. Adjust:
Drive chain slack adjustment steps:
Loosen the axle nut 1 and locknuts 2.
Adjust chain slack by turning the adjusters 3.
To tighten
To loosen
clockwise and push wheel forward.
5PA30560
Turn each adjuster exactly the same
amount to maintain correct axle alignment.
(There are marks a on each side of chain
puller alignment.)
NOTE:
Turn the adjuster so that the chain is in line
with the sprocket, as viewed from the rear.
CAUTION:
Too small chain slack will overload the
engine and other vital parts; keep the
slack within the specified limits.
Tighten the axle nut while pushing down
the drive chain.
Tighten the locknuts.
EC36C000
FRONT FORK INSPECTION
1. Inspect:
Front fork smooth action
Operate the front brake and stroke the front
fork.
Unsmooth action/oil leakage
replace.
5PA30570
EC36D001
FRONT FORK OIL SEAL AND DUST SEAL
CLEANING
1. Remove:
Protector 1
Dust seal 2
NOTE:
Use a thin screw driver, and be careful not to
damage the inner fork tube and dust seal.
5PA30580
3 - 24
INSP
Drive chain slack
Turn adjuster 3 clockwise.
Turn adjuster 3 counter-
Axle nut:
110 Nm (11.0 m • kg, 80 ft • lb)
ADJ
Repair or