Step 4: Install The Software - Toshiba PC-DKT User Manual

———————————————————————————————————

Step 4: Install the Software

Before installing the software, make sure there is a minimum of 5MB of free disk
space. This space is required for running the Call Log and StrataBase functions. You
should also know the IRQ and Address settings for the PC-DKT.
To install the PC-DKT software
1. Insert the installation disk into your floppy-disk drive (A: or B:).
Windows 95: Click Start followed by Run.
Windows 3.1/3.11: From the Program Manager, click File.
2. Type A:\SETUP.EXE and press Enter.
3. When the Interrupt Request Setting
Options dialog box displays (shown
at right), select the appropriate IRQ.
This setting must match the setting
on the PC-DKT card. Click Continue.
4. When the Address Settings Options
dialog box appears (shown at right),
select the appropriate Address. This
setting must match the setting on the
card. Click Continue.
Once installation is complete, click
Restart Windows so that the PC-
DKT's device driver can properly
initialize.
Installation
Step 4: Install the Software
15