Trill; Trill Announcing-Vlan - HP 6125XLG Command Reference Manual

Parameters
count: Specifies the number of distribution trees that the RB wants all RBs to compute. This argument is in
the range of 1 to 15.
Examples
# Set the number of distribution trees that the RB wants all RBs to compute to 2.
<Sysname> system-view
[Sysname] trill
[Sysname-trill] trees calculate 2

trill

Use trill to enable TRILL globally and enter TRILL view.
Use undo trill to disable TRILL globally.
Syntax
trill
undo trill
Default
TRILL is disabled globally.
Views
System view
Predefined user roles
network-admin
Examples
# Enable TRILL globally and enter TRILL view.
<Sysname> system-view
[Sysname] trill
[Sysname-trill]

trill announcing-vlan

Use trill announcing-vlan to configure the announcing VLANs.
Use undo trill announcing-vlan to restore the default.
Syntax
trill announcing-vlan { vlan-list | null }
undo trill announcing-vlan { vlan-list | null }
Defaults
No announcing VLAN is configured. The announcing VLANs are the enabled VLANs.
Views
Ethernet interface view, aggregate interface view
22