Configuring The Fabric Timers In System View; Configuring The Fabric Timers In Vsan View; Configuring The Fabric Reconfiguration - HP 6125XLG Configuration Manual

Configure the timers in VSAN view, and the configuration takes effect for only the VSAN.
•
If you perform the configuration in both system view and VSAN view, the configuration made in VSAN
view applies to the VSAN.

Configuring the fabric timers in system view

Step
1. Enter system view.
2. Configure the global
distributed service timeout
period.
3. Configure the global error
detection timeout period.
4. Configure the global
resource allocation timeout
period.

Configuring the fabric timers in VSAN view

Step
1. Enter system view.
2. Enter VSAN view.
3. Configure the distributed
service timeout period for
the VSAN.
4. Configure the error
detection timeout period
for the VSAN.
5. Configure the resource
allocation timeout period
for the VSAN.

Configuring the fabric reconfiguration

IMPORTANT:
The fabric reconfiguration function takes effects only when the fabric configuration function is enabled.
The fabric reconfiguration occurs in the case of a network reconstruction (for example, two fabrics are
merged) or external intervention (for example, the administrator uses a command to initiate
reconfiguration). The fabric reconfiguration triggers principal switch selection, domain ID assignment,
and FC address assignment throughout the fabric.
The fabric reconfiguration includes the following categories:
Command
system-view
fc timer distributed-services value
fc timer error-detect value
fc timer resource-allocation value
Command
system-view
vsan vsan-id
timer distributed-services value
timer error-detect value
timer resource-allocation value
28
Remarks
N/A
By default, the distributed service
timeout period is 5000
milliseconds.
By default, the error detection
timeout period is 2000
milliseconds.
By default, the resource allocation
timeout period is 10000
milliseconds.
Remarks
N/A
N/A
By default, the distributed service
timeout period is 5000 milliseconds.
By default, the error detection
timeout period is 2000 milliseconds.
By default, the resource allocation
timeout period is 10000
milliseconds.