Cfd Service-Instance Maid Format - HP 6125G Command Reference Manual

Examples
# Create a level-3 MD named test_md, create an MA named test_ma, which serves VLAN 100, in
test_md, and then create service instance 5 with the MD name for test_md and test_ma.
<Sysname> system-view
[Sysname] cfd md test_md level 3
[Sysname] cfd ma test_ma md test_md vlan 100
[Sysname] cfd service-instance 5 md test_md ma test_ma

cfd service-instance maid format

Syntax
cfd service-instance instance-id maid format { icc-based ma-name | string ma-name } level level-value
vlan vlan-id
undo cfd service-instance instance-id
View
System view
Default level
2: System level
Parameters
service-instance instance-id: Specifies a service instance by its ID, which ranges from 1 to 32767.
icc-based ma-name: Specifies an ITU Carrier Codes (ICC)-based MA name. The ma-name argument is
a string of 1 to 13 characters. IEEE 802.1ag standard version allows an MA name to contain letters,
numbers, and special characters (including ~ ! @ # $ % ^ & * ( ) - _ + = { } [ ] | \ : ; " ' < > , . /). IEEE
802.1ag draft5.2 version and IEEE 802.1ag draft5.2 interim version allow an MA name to contain letters,
numbers, and special characters (including – and _), but do not allow an MA name to start or end with
a special character.
string ma-name: Specifies a string as the MA name. The ma-name argument is a string of 1 to 45
characters. IEEE 802.1ag standard version allows an MA name to contain letters, numbers, and special
characters (including ~ ! @ # $ % ^ & * ( ) - _ + = { } [ ] | \ : ; " ' < > , . /). IEEE 802.1ag draft5.2 version
and IEEE 802.1ag draft5.2 interim version allow an MA name to contain letters, numbers, and special
characters (including – and _), but do not allow an MA name to start or end with a special character.
level level-value: Specifies the MD level for the service instance, which ranges from 0 to 7.
vlan vlan-id: Specifies the VLAN for the service instance. The vlan-id argument ranges from 1 to 4094.
Description
Use cfd service-instance maid format to create a service instance without the MD name.
Use undo cfd service-instance to remove the specified service instance.
By default, no service instance is created.
When you create a service instance without the MD name, the system automatically creates the MA and
MD for the service instance.
The service instance ID, MA name, and MD level uniquely identify a MA.
Deleting a service instance also deletes all configurations based on the service instance.
Deleting a service instance removes not only the service instance ID-MA association, but also the MA.
30