Table of Contents
Advertisement
I. Hardware Installation
5. Remove the corresponding expansion slot cover from the com-
puter chassis. The slot cover is the metal strip in the back of the
computer chassis that covers the opening for the adapter's ex-
ternal connector.
6. Ground yourself to an antistatic mat or other grounded source.
7. Pick up the board (still in its sleeve) by grasping the edge bracket
with one hand. Avoiding touching board components.
8. Remove the plastic sleeve.
9. Position the card directly over the PCI slot and insert one end of
the board in the slot first. Carefully press the bus connector on
the bottom of the card down into the slot. Be sure the metal
contacts on the bottom of the host adapter are securely seated in
the slot.
10. Anchor the board's mounting bracket to the computer chassis
using the screw from the slot cover you set aside previously.
11. Replace the cover on the system unit.
12. Connect your analog monitor's 15-pin VGA connector to the
card and fasten the retaining screws (if any).
ASUS PCI-V775V2C User's Manual
9
Advertisement
Table of Contents
