Installation Procedures - Asus PCI-V775V2C User Manual

I. Hardware Installation
This section tells you how to install the ASUS PCI-V775V2C Video
Card in your PC computer. The steps provided below demonstrate
how to install the cards in a typical system. Your system may be
slightly different.
WARNING: Computer boards and components contain very
delicate Integrated Circuit (IC) chips. To protect the computer
board and other components against damage from static elec-
tricity, you should follow some precautions whenever you work
on your computer.
1. Make sure that you unplug your power supply when adding
or removing expansion cards or other system components.
Failure to do so may cause severe damage to both your moth-
erboard and expansion cards.
2. Hold components by the edges and try not to touch the IC
chips, leads, or circuitry.
3. Use a grounded wrist strap before handling computer com-
ponents.
4. Place components on a grounded antistatic pad or on the bag
that came with the component whenever the components are
separated from the system.
IMPORTANT: Keep the host adapter in its antistatic bag until
you are ready to install it. Before you pick up the adapter, ground
yourself by touching an unpainted surface on the computer chas-
sis. Even a little static electricity can destroy a host adapter com-
ponent!

Installation Procedures

1. Unplug all electrical cords on your computer.
2. Remove the screws for the back of the system unit cover.
3. Remove the system unit cover.
4. Find an unused 5volt PCI bus expansion slot. Make sure this
slot is unobstructed.
8 ASUS PCI-V775V2C User's Manual