Table of Contents
Advertisement
DSL-N13 Wireless ADSL 2/2+ Modem Router User Manual
11. Click Next to accept the default name
for the printer.
13. The installation is complete. Click
Finish to quit the Add Printer Wizard.
If you have already installed the printer locally on your computer, right click
the printer icon and select Property -> Port tab to add a standard TCP/IP
port. Click Add Port then select Standard TCP/IP Port and click New Port
button. Refer to Step 5-8 for setting procedures.
If you use Windows
port, you need to use Romote Port which is supported by DSL-N13.
50
12. Select Yes to print a test page. Click
Next to print.
98 or ME which does not support Standard TCP/IP
®
Advertisement
Table of Contents
