Cooling/Heating Operation; Dry Operation; Fan Only Operation (Cooling-Only Models Only) - Toshiba RAS-B10SKVP-E Owner's Manual

COOLING/HEATING OPERATION

Start
a
button
Press this button to start the air conditioner.
b Mode select button (MODE)
Select COOL or HEAT
c Temperature button (
)
TEMP
Set the desired temperature.
d Fan speed button (FAN)
Select one of "AUTO" LOW
HIGH .
• The OPERATION indicator (green) on the display panel of the indoor unit turns on.
Operation starts after approximately 3 minutes.
Stop
button
Press this button again to stop the air conditioner.
• Heating operations cannot be performed by a cooling-only model.

DRY OPERATION

Start
a
button
Press this button to start the air conditioner.
b Mode select button (MODE)
Select DRY .
c Temperature button ( )
TEMP
Set the desired temperature.
• The fan speed setting is fixed to AUTO and the AUTO is displayed.
• The OPERATION indicator (green) on the display panel of the indoor unit turns on, and
operation starts after approximately 3 minutes.
Stop
button
Press this button again to stop the air conditioner.
FAN ONLY OPERATION
Start
a
button
Press this button to start the air conditioner.
b Mode select button (MODE)
Select FAN ONLY .
c Fan speed button (FAN)
Select one of "AUTO" LOW
HIGH .
• The OPERATION indicator (green) on the display panel of the indoor unit turns on.
Operation will start immediately.
• The : FAN ONLY mode does not control the temperature.
Stop
button
Press this button again to stop the air conditioner.
(heat pump models only).
, LOW+ , MED , MED+
(cooling-only models only)
, LOW+ , MED , MED+
,
,
9
c
b
a
d
c
b
a
b
a
c
EN