Wireless Security - Buffalo nfiniti WZR-HP-G450H User Manual

WDS AP
Wireless Network Mode
Defines the IEEE802.11 networking mode.
Mode
Disabled
Mixed
B-Only
G-Only
BG-Mixed
NG-Mixed
N-Only (2.4 GHz)
Channel Width
Some wireless network modes support wireless channel widths besides
the standard 20 MHz. 802.11g & 802.11n offer the option to use 40 MHz
channels for enhanced throughput. Both the AP and the client must
support 40 MHz channels to use them.
Wireless Channel (AP only)
Set the desired wireless channel, or let the router choose a free
channel automatically. If the router is in classic WDS (MAC address
based) mode, then the wireless channel must be selected manually.
Wireless Network Name (SSID)
The name of the wireless network the radio transmits or connects to
( depending on the wireless mode)
Wireless SSID Broadcast (AP only)
The name of the wireless network (SSID) may be broadcasted or not. Not
broadcasting does not prevent the network from being detected by a
wireless network sniffer; it just hides the name.
Advanced Settings
Check this box to get access to advanced wireless settings. These
advanced parameters should be only modified by experienced users.
2.3.2.2.

Wireless Security

Because wireless data packets can easily be sniffed, wireless
connections require a greater level of security to ensure that data
cannot be read by unauthorized users.
WDS AP is the AP side for WDS AP <-> WDS
Station. A WDS AP allows connections from WDS
Stations and Wireless Clients.
Description
Interface is disabled
2.4 GHz 802.11b / 802.11g / 802.11n mixed
mode
2.4 GHz 802.11b mode (802.11g and 802.11n
devices cannot connect)
2.4 GHz 802.11g mode (802.11b, and
devices cannot connect)
2.4 GHz 802.11b & 802.11g mixed mode (802.11n
devices cannot connect)
2.4 GHz 802.11n & 802.11g mixed mode (802.11b
devices cannot connect)
2.4 GHZ 802.11n mode (802.11b and 802.11g
devices cannot connect)
- 9 -
802.11n