Yamaha CDR-HD1500 Quick Start Manual page 13

4
Press the INPUT button
Select ANALOG here since this example uses LP (analog) recording.
(If the input source routes through OPTICAL IN, select OPTICAL,
and if it routes through COAXIAL IN, select COAXIAL.)
5
Press the MENU button
window and adjust the recording level by rotating the
ANALOG REC LEVEL knob on the front panel.
To adjust the recording level, you need to play back the sound
source. Adjust the recording level within the appropriate range
(avoiding the red area of the peak level meter at volume peaks).
(The default value of the digital recording level is set to 0dB [the
original level of the input source]. To adjust, see page 34 in the
Owner's Manual.)
6
If necessary, select and set the HDD recording mode.
You can select a suitable recording mode that provides a track
marker between songs. Track Synchro is selected as the default.
Track Synchro is appropriate for normal recording.
There are five modes.
For more information, see page 35 in the Owner's Manual.
Recording Mode
Manual
Track Synchro
Multi Synchro
*1
(several times) to select ANALOG.
2
INPUT
OPTICAL
COAXIAL
ANALOG
to display the Level adjustment
4
Start/Stop Recording
Track Marker
To place track markers manually.
Manual
Start/stop of song playback is also
Manual
manual.
Track markers will automatically
Manual
be placed between songs according
to song playback. Start/stop song
Auto
playback manually.
Track markers will automatically be
Auto
placed between songs according to
song playback. Designated songs will
Auto
automatically be recorded.
Description
NOTE NOTE
You can select the input source You can select the input source
by pressing the INPUT button by pressing the INPUT button
only when recording standby mode only when recording standby mode
is engaged. You cannot select it is engaged. You cannot select it
unless engaged. unless engaged.
2 2
1