Advertisement
HOW TO OPERAT E
1. TEMPERATURE CONTROL
Te m p e r a t u re is controlled by thermostat automatically. The Te m p e r a t u re Control inside the
refrigerator controls the degree of cooling for each compart m e n t .
F reezer Te m p e r a t u re Contro l
The control has four settings form LOW to
WINTER. The WINTER mode is available only if
atmosphere temperature is below 10°C.
Starting your new refrigerator
1. Clean the refrigerator thoro u g h l y. Wipe the outside with a dry cloth, and the inside with
a damp cloth.
2. Set the temperature control knob at normal position.
3. Connect the power supply cord .
To turn off the re f r i g e r a t o r
Disconnect the power supply cord. Remove icing case and food. Leave doors open for
ventilation and dehumidification of both compartments.
2. RADIANT HEAT
With the Refrigerating System in operation, it is likely that the cabinet will feel warm at the fro n t
edges and sides. This does not indicate malfunction.
It is due to the hot-line used in this type of Refrigerating System which consists of piping hot gas
f rom the (motor-driven) compressor along the front edges, the sides of the cabinet and the center
p a rtition to prevent dewing. This has nothing to do with the storage temperature inside.
(The thick line indicates the hot-line)
N O T E : During hot, humid weather and in rainy season, moisture may
develop on the cabinet, just as water condenses around a cold glass
of water. It is not an abnormal condition; wipe off the moisture with a
dry cloth. This can also happen when the refrigerator is not installed
in an appropriate place.
Refrigerator Te m p e r a t u re Contro l
The control has the four settings from LOW to
WINTER. The WINTER mode is available only if
atmosphere temperature is below 10°C.
3
Advertisement
