Sharp MX-4500N User Manual page 20

5
• Note that the [LOGOUT] key (
[LOGOUT] key (
• If a preset duration of time elapses after the machine is last used, the Auto Clear function will activate. When Auto
Clear activates, logout automatically takes place. However, when PC Scan mode is used, logout does not take
place when the [LOGOUT] key (
the machine and then log out.
If an incorrect login name or password is entered 3 times in a row...
If "A Warning when Login Fails" is enabled in the system settings (administrator), the machine will lock for 5 minutes if an
incorrect login name or password is entered 3 times in a row.
Verify the login name and password that you should use with the administrator of the machine.
• The administrator can clear the locked state. This is done from [User Control] and then [Default Settings] in the Web page
menu.
• Depending on the LDAP authentication method, the [E-mail Address] key may appear. If the [E-mail Address] key appears
in step 3, touch it.
A text entry screen will appear.
Enter your e-mail address. To enter text, see
System Settings (Administrator): User Registration
A user name is stored when a user is registered in "User Registration". Detailed information such as the login name, user
number, and password are also stored. Ask the administrator of the machine for the information that you need to use the
machine.
LOGOUT
) cannot be used to log out when a fax number is being entered in fax mode, as
) input is treated as part of a fax number.
) is pressed and Auto Clear does not operate. Change to a different mode on
Please enter your login name /
E-mail address / password.
User Authentication
Login Name
User Name
E-mail Address
Password
Auth to:
When you have finished using the
machine and are ready to log out, press
the [LOGOUT] key (
"6. ENTERING TEXT" (page 66).
User 0002
Server 2
19
).
OK