The Functions Of The Control Panel - Daewoo DWF-171M Instruction Manual

THE FUNCTIONS OF THE CONTROL PANEL

WASH TEMP.
HOT
COLD
WASH
TEMP.
POWER • Press this switch to turn the power on or off.
• It can be used to choose water temperature to be supplied.
• As the button is pressed, water temperature will be repeated.
WASH COLD
TEMP.
• In case of the single valve model, there is no wash temperature
selector function.
• It can be used to adjust amount of water according to the size of the
load to be washed.
WATER
• As the button is pressed, water level is selected by
LEVEL
MEDIUM
• It can be used to pre-engage time for wash.
RES
• It is the button for the partial process or the combination of each
PROCESS
process (wash, rince, spin) (See page 10)
• If you want to change wash time, rince times, spin time, you must
CONTROL
press this button after selecting each process by the process button.
ONLY SPIN
Also, this button can be used to spin only. (See page 10)
• It can be used to select the full-automatic course.
• As the button is pressed, course will be selected by following order:
COURSE
FUZZY
• Operation and temporary stop is repeated as it is pressed.
• When you want to change course in operating;
START/
press the "START/HOLD" button
HOLD
change
SUIT NORMAL
REMAIN
WATER LEVEL
SOAK BLANKET
H.
ECONOMY
M.
L.
S.
WATER
LEVEL
COURSE RES.
COLD+HOT
HIGH SMALL
BLANKET ECONOMY
press the "START/HOLD" button again.
8
WASH
CONTROL
RINSE
ONLY SPIN
SPIN
MIN.
PROCESS
HOT
LOW
SUIT SOAK
Select the course that you want to
POWER
START
HOLD